Extra Large Block Mould (BM02)
This Mould is ideal for casting larger slabs of resin which can then be cut into required blank sizes, ideal for casting larger numbers of the same blank.
1 cavity @ 20mm x 165mm x 135mm (+5mm on height to prevent spillages)
Approx 445ml resin per cavity to fill line.
External dimensions 35mm x 195mm x 165mm
Note: Mould has a handy indicator line to enable you to fill to the right level, you can also cast up to 25mm thick pen blanks with this mould by filling the mould to the top.
If planning to use in a pressure pot, please check the dimensions first, as this mould may not fit standard 10L pressure pots unless you trim the corners off.
All our silicone moulds are manufactured using Addition/Platinum cure silicone.
Any moulds showing as 'out of stock' can still be ordered, and will be made to order, usually within 1-3 working days.
1 cavity @ 20mm x 165mm x 135mm (+5mm on height to prevent spillages)
Approx 445ml resin per cavity to fill line.
External dimensions 35mm x 195mm x 165mm
Note: Mould has a handy indicator line to enable you to fill to the right level, you can also cast up to 25mm thick pen blanks with this mould by filling the mould to the top.
If planning to use in a pressure pot, please check the dimensions first, as this mould may not fit standard 10L pressure pots unless you trim the corners off.
All our silicone moulds are manufactured using Addition/Platinum cure silicone.
Any moulds showing as 'out of stock' can still be ordered, and will be made to order, usually within 1-3 working days.
