Universal Casting Mould

This casting mould is truly universal and has endless possibilities as to what you can cast from it, for example, with a full cast you can cross cut blanks to required length for shaving brush handles, bottle stoppers, spinning tops etc. You can cut the blank lengthways to get four 20mm x 20mm x 180mm pen blanks or slice the blank lengthways to create matching knife scales. You can also just partially fill the mould with resin (we’ve added a handy fill line at the halfway point) for 2 pen blanks or 1 set of knife scales etc, the list is endless. If you don’t want to cast the full length of the mould you can use a piece of HDPE or other suitable material to create a shorter cavity.

1 cavity @ 45mm x 45mm x 180mm (+5mm on height to prevent spillages)
Approx 365ml resin per cavity to fill line
External dimensions 60mm x 74mm x 210mm

Note: Mould has a handy indicator line to enable you to fill to the right level.

All our silicone moulds are manufactured using Addition/Platinum cure silicone.

Any moulds showing as 'out of stock' can still be ordered, and will be made to order, usually within 1-3 working days.