2 Cavity 25mm x 50mm Casting Moulds
These 25mm x 50mm Casting Moulds are available in various lengths and are ideal for casting up to 25mm thick blanks (note internal dimensions are 30mm x 50mm to allow an additional 5mm clearance to prevent spillages).
You can cast two matching blanks in one go, then saw down the centre, ideal for matching pen sets. This mould would also be suitable for making knife scales, by filling the mould to the required level then slicing i
lf on a bandsaw, you can make matching bookends.
These moulds contain a removable silicone bung in each cavity which makes de-moulding easier so there should be no need to dismantle the mould.
Available Lengths:
130mm long (external dimensions 45mm x 80mm x 154mm)
150mm long (external dimensions 45mm x 80mm x 174mm)
180mm long (external dimensions 45mm x 80mm x 204mm)
200mm long (external dimensions 45mm x 80mm x 224mm)
220mm long (external dimensions 45mm x 80mm x 244mm)
Approx amount of resin required for each cavity:
130mm long - 163ml
150mm long - 188ml
180mm long - 225ml
200mm long - 250ml
220mm long - 275ml
We try to stock the most popular moulds, but due to the extensive range of sizes we offer, we are unable to stock all of them. Any moulds showing as 'out of stock' can still be ordered, and will be made to order, usually within 1-3 working days. If you don't see the mould you are looking for please Contact Us as we are constantly adding to our range of moulds and we can also make custom moulds.
You can cast two matching blanks in one go, then saw down the centre, ideal for matching pen sets. This mould would also be suitable for making knife scales, by filling the mould to the required level then slicing i
lf on a bandsaw, you can make matching bookends.
These moulds contain a removable silicone bung in each cavity which makes de-moulding easier so there should be no need to dismantle the mould.
Available Lengths:
130mm long (external dimensions 45mm x 80mm x 154mm)
150mm long (external dimensions 45mm x 80mm x 174mm)
180mm long (external dimensions 45mm x 80mm x 204mm)
200mm long (external dimensions 45mm x 80mm x 224mm)
220mm long (external dimensions 45mm x 80mm x 244mm)
Approx amount of resin required for each cavity:
130mm long - 163ml
150mm long - 188ml
180mm long - 225ml
200mm long - 250ml
220mm long - 275ml
We try to stock the most popular moulds, but due to the extensive range of sizes we offer, we are unable to stock all of them. Any moulds showing as 'out of stock' can still be ordered, and will be made to order, usually within 1-3 working days. If you don't see the mould you are looking for please Contact Us as we are constantly adding to our range of moulds and we can also make custom moulds.
