Large Double Pen Blank Mould
This Double Pen Blank Mould is ideal for casting two matching blanks in one go, then saw down the centre, ideal for matching pen sets. We've also added an extra 3mm on the width for the kerf of the saw blade.
This mould would also be suitable for making knife scales, by filling the mould to the required level then slicing in half on a bandsaw, you can make matching bookends.
3 cavities @ 20mm x 43mm x 135mm (+5mm on height to prevent spillages)
Approx 116ml resin per cavity to fill line.
External dimensions 35mm x 183mm x 165mm
Note: Mould has a handy indicator line to enable you to fill to the right level.
All our silicone moulds are manufactured using Addition/Platinum cure silicone.
This mould would also be suitable for making knife scales, by filling the mould to the required level then slicing in half on a bandsaw, you can make matching bookends.
3 cavities @ 20mm x 43mm x 135mm (+5mm on height to prevent spillages)
Approx 116ml resin per cavity to fill line.
External dimensions 35mm x 183mm x 165mm
Note: Mould has a handy indicator line to enable you to fill to the right level.
All our silicone moulds are manufactured using Addition/Platinum cure silicone.
