Long Double Pen Blank Mould

This longer version of our Double Pen Blank Mould has been made to accommodate the growing range of pen kits which use longer tubes, you can get 2 projects out of one blank with kits such as razor handles and the new TM Athena, or you now can easily get 3 standard tubes such as Sierras from one blank without the usual waste. You can cast two matching blanks in one go, then saw down the centre, ideal for matching pen sets. We've also added an extra 3mm on the width for the kerf of the saw blade.

This mould would also be suitable for making knife scales, by filling the mould to the required level then slicing in half on a bandsaw, you can make matching bookends.

1 cavity @ 20mm x 43mm x 180mm (+5mm on height to prevent spillages)
Approx 156ml resin per cavity to fill line.
External dimensions 35mm x 75mm x 210mm

Note: Mould has a handy indicator line to enable you to fill to the right level.

All our silicone moulds are manufactured using Addition/Platinum cure silicone.

Any moulds showing as 'out of stock' can still be ordered, and will be made to order, usually within 1-3 working days.