Small Double Pen Blank Mould
This smaller version of our double pen blank mould has been made specifically with smaller scale casters in mind. You can cast two matching blanks in one go, then saw down the centre, ideal for matching pen sets. We've also added an extra 3mm on the width for the kerf of the saw blade.
This mould would also be suitable for making knife scales, by filling the mould to the required level then slicing in half on a bandsaw, you can make matching bookends.
1 cavity @ 20mm x 43mm x 135mm (+5mm on height to prevent spillages)
Approx 116ml resin per cavity to fill line.
External dimensions 35mm x 75mm x 165mm
Note: Mould has a handy indicator line to enable you to fill to the right level.
All our silicone moulds are manufactured using Addition/Platinum cure silicone.
Due to the vast range of moulds and different size options we offer, we have decided to reduce our stock and move over to making them to order (usually within 1-3 working days). If it isn’t showing any stock levels it is now made to order.
This mould would also be suitable for making knife scales, by filling the mould to the required level then slicing in half on a bandsaw, you can make matching bookends.
1 cavity @ 20mm x 43mm x 135mm (+5mm on height to prevent spillages)
Approx 116ml resin per cavity to fill line.
External dimensions 35mm x 75mm x 165mm
Note: Mould has a handy indicator line to enable you to fill to the right level.
All our silicone moulds are manufactured using Addition/Platinum cure silicone.
Due to the vast range of moulds and different size options we offer, we have decided to reduce our stock and move over to making them to order (usually within 1-3 working days). If it isn’t showing any stock levels it is now made to order.
