*New* 2 Cavity 22mm x 22mm Casting Moulds
2 Cavity 22mm x 22mm Pen Blank Moulds
These 2 Cavity Pen Blank Moulds are available in various lengths and are ideal for casting Chunky 22mm x 22mm Pen blanks especially for extra large fountain pen caps (note internal dimensions are 27mm x 22mm to allow an additional 5mm clearance on the height to help prevent spillages).
Can also be used in conjunction with our new 22mm Tube-In-Mould Plugs for Label/Tube casting of the extra large fountain Pen Cap tubes that are to big for our 20mm Plugs or Less-Resin moulds.
Note - Tube-In-Mould plugs sold separately, click here to view and order
These moulds contain a removable silicone bung in each cavity which makes de-moulding easier so there should be no need to dismantle the mould (180mm and longer have two bungs in each cavity which aids demoulding when Label/Tube casting 2 tubes per cavity).
Available Lengths:
Available Lengths:
130mm long (external dimensions 47mm x 86mm x 154mm)
150mm long (external dimensions 47mm x 86mm x 174mm)
180mm long (external dimensions 47mm x 86mm x 204mm)
200mm long (external dimensions 47mm x 86mm x 224mm)
220mm long (external dimensions 47mm x 86mm x 244mm)
Approx amount of resin required for each cavity:
130mm long - 63ml
150mm long - 73ml
180mm long - 87ml
200mm long - 97ml
220mm long - 107ml
We have now used up all our HDPE, so please Do Not order more moulds than is showing as in stock, once they’ve gone they’ve gone.
These 2 Cavity Pen Blank Moulds are available in various lengths and are ideal for casting Chunky 22mm x 22mm Pen blanks especially for extra large fountain pen caps (note internal dimensions are 27mm x 22mm to allow an additional 5mm clearance on the height to help prevent spillages).
Can also be used in conjunction with our new 22mm Tube-In-Mould Plugs for Label/Tube casting of the extra large fountain Pen Cap tubes that are to big for our 20mm Plugs or Less-Resin moulds.
Note - Tube-In-Mould plugs sold separately, click here to view and order
These moulds contain a removable silicone bung in each cavity which makes de-moulding easier so there should be no need to dismantle the mould (180mm and longer have two bungs in each cavity which aids demoulding when Label/Tube casting 2 tubes per cavity).
Available Lengths:
Available Lengths:
130mm long (external dimensions 47mm x 86mm x 154mm)
150mm long (external dimensions 47mm x 86mm x 174mm)
180mm long (external dimensions 47mm x 86mm x 204mm)
200mm long (external dimensions 47mm x 86mm x 224mm)
220mm long (external dimensions 47mm x 86mm x 244mm)
Approx amount of resin required for each cavity:
130mm long - 63ml
150mm long - 73ml
180mm long - 87ml
200mm long - 97ml
220mm long - 107ml
We have now used up all our HDPE, so please Do Not order more moulds than is showing as in stock, once they’ve gone they’ve gone.
