*New* 4 Cavity 22mm x 22mm Pen Blank Moulds
These 4 Cavity Pen Blank Moulds are available in various lengths and are ideal for casting Chunky 22mm x 22mm Pen blanks especially for extra large fountain pen caps (note internal dimensions are 27mm x 22mm to allow an additional 5mm clearance on the height to help prevent spillages).
Can also be used in conjunction with our new 22mm Tube-In-Mould Plugs for Label/Tube casting of the extra large fountain Pen Cap tubes that are to big for our 20mm Plugs or Less-Resin moulds.
Note - Tube-In-Mould plugs sold separately, click here to view and order
These moulds contain a removable silicone bung in each cavity which makes de-moulding easier so there should be no need to dismantle the mould (180mm and longer have two bungs in each cavity which aids demoulding when Label/Tube casting 2 tubes per cavity).
Available Lengths:
130mm long (external dimensions 47mm x 154mm x 154mm)
150mm long (external dimensions 47mm x 154mm x 174mm)
Note: Sizes below will not fit 10L Pressure Pots.
180mm long (external dimensions 47mm x 154mm x 204mm)
200mm long (external dimensions 47mm x 154mm x 212mm)
220mm long (external dimensions 47mm x 154mm x 244mm)
Approx amount of resin required for each cavity:
130mm long - 63ml
150mm long - 73ml
180mm long - 87ml
200mm long - 97ml
220mm long - 107ml
We try to stock the most popular moulds, but due to the extensive range of sizes we offer, we are unable to stock all of them. Any moulds showing as 'out of stock' can still be ordered, and will be made to order, usually within 1-3 working days. If you don't see the mould you are looking for please Contact Us as we are constantly adding to our range of moulds and we can also make custom moulds.
Can also be used in conjunction with our new 22mm Tube-In-Mould Plugs for Label/Tube casting of the extra large fountain Pen Cap tubes that are to big for our 20mm Plugs or Less-Resin moulds.
Note - Tube-In-Mould plugs sold separately, click here to view and order
These moulds contain a removable silicone bung in each cavity which makes de-moulding easier so there should be no need to dismantle the mould (180mm and longer have two bungs in each cavity which aids demoulding when Label/Tube casting 2 tubes per cavity).
Available Lengths:
130mm long (external dimensions 47mm x 154mm x 154mm)
150mm long (external dimensions 47mm x 154mm x 174mm)
Note: Sizes below will not fit 10L Pressure Pots.
180mm long (external dimensions 47mm x 154mm x 204mm)
200mm long (external dimensions 47mm x 154mm x 212mm)
220mm long (external dimensions 47mm x 154mm x 244mm)
Approx amount of resin required for each cavity:
130mm long - 63ml
150mm long - 73ml
180mm long - 87ml
200mm long - 97ml
220mm long - 107ml
We try to stock the most popular moulds, but due to the extensive range of sizes we offer, we are unable to stock all of them. Any moulds showing as 'out of stock' can still be ordered, and will be made to order, usually within 1-3 working days. If you don't see the mould you are looking for please Contact Us as we are constantly adding to our range of moulds and we can also make custom moulds.
